Picosecond Lasers - High Power
|
||||||
For applications requiring either high average power (>8 W) and/or high pulse energy (>10 µJ) with pulse width in the 5 to 15 ps range or optional longer. All featuring near diffraction-limited beams, user-specifiable repetition rates, optional wavelength conversion, and clock synchronization. Enabled by our SESAM  technology |
||||||
 |
||
High pulse energy with high average power picosecond MOPA (10 ps pulses with up to 180 µJ and up to 14 W at 1064 nm) with simple push-button repetition rate adjustment from 50 kHz to 8 MHz. Typical applications include material processing (cold ablation).
|
||
 |
||
High average power (10 W) picosecond oscillator (12 ps) with user-specifiable repetition rates from 50 to 350 MHz.
|
||
 |
||
Scientific version of the Cheetah-X with customizable, user-accessible platform for more flexibility in customization (i.e. repetition rates from 20 to 350 MHz, user-changeable pulsewidths, pulse picking, etc.).
|
||
 |
||
Power-amplified Cheetah-X industrial picosecond system with average power of either 25 W or >45 W. |
||
 |
||
Power-amplified Duetto system with up to 50 W average power featuring simple push-button user adjustment of repetition rate from 200 kHz to 8 MHz, allowing for optimized process speed and performance in picosecond material processing. |
||
 |
||
Fully intergrated, all-diode-pumped picosecond regenerative amplifier with high pulse energy (>500 µJ) at moderate repetition rates (up to 4 kHz) and average power (1 W) at 1064 nm wavelength.
|
||
 |
||
Similar to Jaguar-CW but with pulsed pump laser to achieve higher pulse energy (>1 mJ) however with lower repetition rates (up to 100 Hz). Available at either 1047 nm or 1053 nm wavelengths.
|
||